Single row Japan NSK Angular Contact ball bearing 7316B Fast Delivery NTN 7316B angular contact ball bearing

The Brief Description of Angular Contact Ball Bearings:

SINGLE ROW ANGULAR CONTACT

Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30 but, in many cases, a 40 contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15 contact angle.

DOUBLE ROW ANGULAR CONTACT

Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTNs 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

Universal design

Single row angular contact ball bearings of universal design have the suffix UA, UL or UO and are intended for fitting in pairs in an X, O or tandem arrangement or fitting in groups. These bearings can be fitted in any arrangement required. For tandem arrangements, pay attention to the guidelines in the section link.

The suffix UA indicates small axial internal clearance, the suffix UL indicates slight preload and the suffix UO indicates freedom from clearance in an X or O arrangement.

When ordering bearings, the total quantity of bearings must be stated, not the number of bearing pairs or bearing groups.

Sealing

Bearings with the suffix 2RS have lip seals on both sides. Contact RS seals are suitable for giving protection against dust, contamination and damp atmospheres.

Lubrication

Bearings with lip seals on both sides are greased with a high quality grease and are lubricated for life.

Open bearings and bearings with seals on one side are not greased. They can be lubricated with grease

or oil.

Operating temperature

Open angular contact ball bearings can be used at operating temperatures from -30 °C to +150 °C. Bearings with a diameter D > 240 mm are dimensionally stable up to +200 °C.

Angular contact ball bearings with cages made from glass fibre reinforced polyamide are suitable for operating temperatures up to +120 °C, restricted by the cage material.

Sealed bearings are suitable for operating temperatures from -30 °C to +110 °C, restricted by the lubricant and the seal material.

Cages

Angular contact ball bearings with solid cages made from glass fibre reinforced polyamide have the suffix TVP or TVH.

Solid brass cages have the suffix MP.

The bearings are also available with universally applicable sheet steel window cages (suffix JP).

Check the chemical resistance of polyamide to synthetic greases and lubricants with EP additives.

Aged oil and additives in the oil can impair the operating life of plastic cages at high temperatures.

The oil change intervals must be observed.

NTN Single Row Angular Contact Ball Bearing 7300 series 7316BL1G :

Angular Contact Ball Bearings 7316BL1G Applications:

Single row: machine tool spindle, high frequency motor, gas turbine, centrifuge, differential pinion-shaft, small cars’s front wheel, etc.

Double row: oil pump, roots blower, air compressor, all kinds of transmission gearbox, fuel injection pump, printing machinery, etc.

Angular Contact Ball Bearings:

Angular Contact Ball Bearing Pictures:

  Established in 1989, Wuxi Guangqiang Bearing Trade Co.,Ltd works hard in researching and manufacturing high quality bearings and rely on it's advantages of strong technologies, advanced equipment, professional technical team, quality production and reasonable prices has gain a broad recognitiongain and won the widely support and trust by customers in bearing fields.

  For decades, the company established and completed the quality management system of scientific standardization in line with international standards. In 2005 they won the title of Chinese famous brand ranging from tapered roller bearings, cylindrical roller bearings, spherical roller bearings, thrust ball bearing, angular contact ball bearings, deep groove ball bearings and various non-standard bearings etc.

  Our products are widely used in auto industries, construction machinery industries, electric power industries, pharmaceutical field, mining machinery, printing industries, highway engineering machinery, steel industires, textile machine industries and so on.

  Capable of solving all your bearing issues with its first-class professional advisers and skilled engineers, Wuxi Guangqiang Bearing Trade Co.,Ltd embrace any inquiry, negotiation, cooperation from new and old friends at any time.